Advertisement
PAMS Technical Documentation
Disassembly of NPM–9
1.
DISASSEMBLY INSTRUCTIONS
Attention
: Before starting this procedure you must take care of ESD precautions like being in your
area and connecting your arm wrist.
Push the unlock–button and move
in direction to the System Connector.
Remove the six screws with screwdriver Torx T6 in
the shown
order.
When
order has to be taken with a torque of 17Ncm.
Now the
module can be
UI
not to
the board to board
damage
afterwards which is located on the CMT module.
Issue 1 02/2002
the battery
cover
the
assembling
reverse
Please take care
removed.
connector
E Nokia Corporation
Disassembly Instructions
Pull the A–Cover and B–Cover apart to open the unit.
removing the UI module LU9 this clip has
Before
to be released with a screwdriver or tweezers.
Lift up the CMT module LA5 carefully. Sometimes
the
happens that
battery connector gets stuck
Card
care not to bend the
Cover.
Take
SIM
the
contacts of
battery connector.
NPM–9
ESD–
it
at the
spring
Page 3
Advertisement
