Programming Memory Pads For 2 Or 3 Stages Heating - Panasonic NE-1037 Operating Instructions Manual

B. Programming Memory Pads for 2 or 3 Stages Heating:
Example: To program for 2 minutes at DEF (defrost power) for 2nd stage heating using Memory Pad 5
1. Complete steps 1 to 4 on page 8.
2.
3.
4.
NOTE: • Program the remaining Memory Pads as desired by repeating the steps above.
DO NOT OPEN THE OVEN DOOR during programming.
• For 3 stages heating, select a further power level and set the desired heating time between steps 3 and
4 above.
F0003BS90QP_Eng_00_20150722.indd Sec1:10 F0003BS90QP_Eng_00_20150722.indd Sec1:10
How to Operate
• Program the 1st stage for 30 seconds at
MED (medium power).
• Press the Power Level Pad 3 times.
"DEF" indicator is now displayed.
• Press the Memory Pads 2, 0 and 0.
• Press the Program Pad again. You have
completed programming the selected
Memory Pad for 2 stages heating. Double
heating time for double quantity heating
was automatically set.
• 2 seconds later, the display will confirm
your programming.
• After all of your programming has been
completed, the display will go blank.
- 10 -
2015/7/22 9:46:01 2015/7/22 9:46:01