Field Test; Programming Psids And Rsids - Nokia NSW-6 Series Technical Documentation Manual

PAMS Technical Documentation

Field test:

The Field Test Display Mode is used to investigate how the phone and the
cellular network are interfacing together.
The Field Test Display Mode reports valuable information about the signal
strength, battery charging status, cellular state and encryption status.
The information is organized to display information relating to Analog Control
Channels, Digital Control Channels, Analog Voice Channels, and Digital
Voice channels. All the information provided in this display is in accordance
with IS–136.
To activate the Field Test Display Mode you must be in NAM programming.
Instructions for entering NAM programming are on the previous pages.
From the Main Menu use the scroll key to display the "Field test" menu and
press the [Select] softkey.
Use the Scroll key to select "Enable" and press the [OK] softkey.
Turn the 8860 off then back on. The FIELD TEST display will begin automati-
cally after wake–up as long as the user does not enter any characters into
the display.
Scroll through the 7 different displays using the scroll key. Note that the
automatic scroll feature for the Short Code Memory is disabled.
To disable the FIELD TEST mode. Return to NAM programming and dis-
able the function under the FIELD TEST menu. Or, select MENU 10 and
enter [00] in the field and press [OK].
P PSIDS and RSIDS:
rogramming
The Nokia 8860 provides the option to program Private (PSIDs) and Resi-
dential (RSIDs) System ID's as prescribed by IS–136. The PSID / RSID
list is programmed to support system selection / re–selection processes,
and SID display functions.
The Nokia 8860 product will support up to 5 different Private or Residen-
tial Systems in NAM 1. Using the NAM programming menu to program
the PSID / RSID is just one of several ways that this information can be
programmed. The phone also supports automatic programming of the
PSID / RSID values via registration accept message from a Public & Pri-
vate system, manually prompting with System Scan sub–menu option
"New Search", or via Over the Air Programming. Follow these instruc-
tions to program the PSID / RSID lists.
1. Enter the NAM programming menu and select NAM 1 (or the desired
NAM). (Note: PSID / RSID is currently only available in the NAM 1 location.
PSID / RSID locations for NAM 2 and 3 are reserved for future use.)
2. Use the scroll key to display "PSID / RSID LISTS" then press [Select].
3. Use the scroll key to select the PSID / RSID 1 or the desired PSID / RSID
(1 through 5). Press the [Select] softkey.
Issue 1 12/99
Tuning, Flashing and NAM programming instructions
E Nokia Mobile Phones Ltd.
NSW-6
Page 17