Trouble Shooting - Nokia NSW-6 Series Disassembly & Troubleshooting Instructions

NSW-6
Disassembly & Troubleshooting

Trouble Shooting

The following hints should facility finding the cause of the problem when
the circuitry seems to be faulty. This trouble shooting instruction is di-
vided following section.
1. Phone is totally dead
2. Flash programming does not work
3. Power does not stay on or the phone is jammed
4. Display information: Contact Service
5. Phone does not register to the network or phone does not make a call.
6. Audio fault.
7. Charging fault
The first thing to do is carry out a through visual check of the module. En-
sure in particular that:
a) there are not any mechanical damages
b) soldered joints are OK
Page 12
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 12/99