Maintenance - Yamato RH 1250-32 Instruction Manual

RH 1250/32 – cod. 55116
Rotation: To work with just the rotation function, turn the selection switches (3 and 4) as
shown in FIG. 2
Chipping function : To work with just the percussion function turn the selection switches (3
and 4) as shown in FIG. 2.

6. MAINTENANCE

6a. Lubricating the gears:
After 50 hours using the perforating hammer, the gearbox should be controlled and, if
necessary, lubricating grease added. Use the two-pin spanner that is supplied and unscrew
and remove the gearbox cover. Add sufficient grease to cover the gears. Dot not
completely fill the gearbox. After greasing, carefully replace the lid.
6b. Normal maintenance
This power tool has been studied to last long with an easy maintenance.
Keep clean the ventilation windows on machine body by a dry cloth.
7. WARRANTY
This power tool is guaranteed for a period of 24 months, from possible defects of
manufacturing. Warranty shall cover regular operation of product and won't include
defects caused by wear, improper maintenance, tampering by unskilled people,
improper usage, usage of improper accessories, overloading condition etc. Warranty shall
remain valid if the purchasing date shall be confirmed by bill of lading, invoice, ticket as
evidence.
Information on disposal for users of waste electrical & electronic equipment.
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge
basis. Disposing of these products correctly will help to save valuable resources and
prevent any potential negative effects on human health and the environment which
could otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point.
17