Inputs And Outputs; Specifications; Supplied Accessories - Sony TA-MR2ES Specification Sheet
Distributed audio amplifier
Hide thumbs
Also See for TA-MR2ES:
- Service manual (26 pages) ,
- Installation manual (20 pages) ,
- Technical background (38 pages)
Advertisement
Features
General
• Silver Finish Distributed Audio
Amplifier
• 35W x 2 (8 ohms 20Hz-20kHz,
THD 0.09%)
• 40W x 2 (4 ohms 20Hz-20kHz,
THD 0.09%)
• Audio Signal Sensor Activation
• 19-inch Rack Mountable
Specifications
General
• Power Consumption:
100W
• Power Requirements:
120V, 60Hz
• Frequency Response:
5-100Khz, +0.5/-2dB
• Residual Noise: <150_V
or less
• Channel Separation:
60dB/45dB
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
©2005 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice. Sony is a trademark of Sony. All other trademarks are trademarks of their respective owners.
IR Programming
• 12 Distinct IR Code Sets
• IR Programming from Back Panel
• Vol +/- and Mute On/Off (Toggle)
Audio Input
• Sensitivity: 150mV
• Impedance:
50kilo Ohms
• S/N: 94dB (A-weighted
filter, 150mV input level)
Audio Output
• Voltage: Minimum 2V
without clipped
• Impedance: 1 kilo Ohms
• S/N: 102dB (A-weighted
filter, 2V output)
Distributed Audio Amplifier
Inputs and Outputs
• 12V Trigger In x 1
• 12V Trigger Out With 1.5 sec
Delay x 1
• IR Input Port with
Pass-Through x 1
• IR Output Port x 1
Supplied
Accessories
• Instruction Manual
• AC Power Cord x 1
• Rack Mount Ear x 2
• Rack Mount Screw x 8
http://www.sony.com/dn
TA-MR2ES
Weights and
Measures
• 14 lbs. 5 oz (6.5 kg)
• 17" x 2 5/8" x 13 7/8"
(430 x 67 x 350 mm)
UPC Code
• TBD
For more information:
Advertisement
