ABB 6953 EB-101-500 Manual page 27

GB
Important Information
ATTENTION
Work on the 230 V power system may only be performed
by qualified electricians. DIN-VDE standards and rules,
as well as those contained in the EIB manual of the
ZVEI/ZVEH, must be adhered to.
The manufacturer's database available from ABB is
continuously updated and contains the latest applications.
Please refer to the Technical Manual for the relevant
descriptions. Should you not yet have the database and/or
the Technical Manual, you can request these free of
charge.
The devicees are programmed with the ETS 2 or with Po-
wer-Project (min. Vers. 3.0).
NOTE
When wiring the ABB Powernet EIB built-in switch/dimmer
actuator 6953 EB-101-500 (hereinafter referred to as built-in
device 6953 EB-101-500) with incandescent lamps, the
instructions of the lamp/electronic control gear manufacturer