Download Print this page
Blinds Direct FAUX WOOD VENETIANS Fitting Instructions

Blinds Direct FAUX WOOD VENETIANS Fitting Instructions

Advertisement

Quick Links

BREAKAWAY CORD CONDESNER
Breakaway cord condenser is
If the cord condenser is pulled apart:
pre-fitted to the lift cords so that when
a horizontal force is applied to the
Untangle and untwist cords.
cords entering the condenser it safely
breaks away eliminating any hazardous
For 2 cords: Press the cord condenser
loops.
together until it is fully closed.
For 3 cords: Place the loose cord
in the opening in one half of the
cord condenser and press the cord
condenser together until it is fully
closed.
For 4 cords: Place one of the loose
cords in the opening in one half of the
cord condenser, the remaining loose
cord in the opening in the other half
and press the cord condenser together
until it is fully closed.
If there are any doubts that the cord
condenser has not been re-attached
correctly it can tested by placing your
arm between the cords and pressing
downwards. The condenser should
break apart with minimal force, if it
does not breakaway tie cords out
of reach of children and contact a
reputable blind company to repair the
blind.
PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
TILT OPERATION
To tilt blind: Pull on required tilt cord tassel to tilt slats to the
MAINTENANCE
open/closed position.
The product is maintenance free however we recommend
that regular visual checks are completed to ensure that
no components have been damaged, which could result in
operating difficulties and/or cause a safety risk.
If any maintenance is required we recommend that the work
is carried out immediately, by a reputable blind company.
Tilt blind horizontal before raising/lowering to extend the
life of the blind.
To lower blind: Move lift cord towards middle of the blind
pulling down gently until cord lock releases.
To raise blind: Pull lift cord downward until blind reaches
desired height.
To lock cords: Pull lift cord towards the outside of the blind
and release. Cord will lock automatically.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes
and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the reach
of young children.
Cords may become wrapped around a child's neck.
Move beds, cots and furniture away from window covering cords.Do
not tie cords together. Make sure cords do not twist and create a loop.
FAUX WOOD VENETIANS
V.3.0
FITTING INSTRUCTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the FAUX WOOD VENETIANS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Blinds Direct FAUX WOOD VENETIANS

  • Page 1 To avoid strangulation and entanglement, keep cords out of the reach of young children. FAUX WOOD VENETIANS Cords may become wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords.Do V.3.0...
  • Page 2 FITTING THE HEADRAIL ATTACHING THE VALANCE YOU SHOULD HAVE THE INSTALLATION HEIGHT OF THIS BLIND MUST NOT BE LESS THAN 1500MM FROM THE FLOOR. VALANCE CLIP Engage the top leg of the valance HOLD DOWN BRACKET clip into the groove on the back of (OPTIONAL) Hook the valance clips evenly along the valance.