Nokia NSM-5 Series Disassembly & Troubleshooting Instructions page 6

NSM–5
Disassembly & Troubleshooting Instructions
1.
5.
2. 6.
Page 6
4.
3.
Remove the frame screws (6 pcs) starting
from number 1 (bottom left).
NOTE: In assembly use reversed order.
NOTE: When assembling the screws,
use 17 Ncm torque.
3.
Drive size is torx plus 6.
Tightening torque is 17 Ncm.
In assembly check that PWB is not bent.
UI module can now be separated from
the main frame/system module.
UI module and system PWB apart.
E Nokia Corporation
PAMS Technical Documentation
Remove the UI module.
Issue 1 02/2002