Technical Data - Dexter Power NC750JS Legal And Safety Instructions

4. TECHNICAL DATA

Type designation
Rated voltage
Rated power input
Speed, n
0
Cutting angle range
Cutting capacity
Level of acoustic pressure L
Level of acoustic power L
Level of vibration a
NOTE:
- the declared vibration total value and the declared noise emission values have been measured in
accordance with a standard test method and may be used for comparing one tool with another;
- the declared vibration total value and the declared noise emission values may also be used in a
preliminary assessment of exposure.
WARNING:
- the vibration emission and noise emissions during actual use of the power tool can differ from
the declared total value depending on the ways in which the tool is used, especially what kind
of work piece is processed;
- avoid vibration risk:maintain the tool and the accessories, wear gloves during operation, limit
operating time and shorten trigger time.
Contents of packing
1 Jig saw
1 Dust extraction adaptor
1 Hex key
1 Blade for wood
1 Parrallel guide
1 Instruction manual (with 1 safety instructions and 1 guarantee card)
After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.
EN
NC750JS Jig Saw
230V~ 50Hz
750W
0-3000/min
0-45°
Wood: 85mm Steel: 10mm
(K =3dB(A)) 89.3 dB(A)
PA PA
(K =3dB(A)) 100.3 dB(A)
WA WA
(K=1.5m/s ) a
2
h h,B
=12.39 m/s a =10.83 m/s
2 2
h,M
96