Cruise Control Switch; To Set Cruise Control Speed - Kia CEED Owner's Manual

Driving your vehicle
✽ NOTICE
During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
✽ NOTICE
To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch to the
ON position or starting the engine.
This is to check if the brake switch
which is important part to cancel
cruise control is in normal condi-
tion.
6 96

Cruise control switch

O : Cancels cruise control operation.
: Turns cruise control system
on or off.
RES+: Resumes or increases cruise
control speed.
SET-: Sets or decreases cruise con-
trol speed.

To set cruise control speed:

OCD058097
1. Press the cruise
on the steering wheel, to turn the
system on. The set speed will illu-
minate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
✽ NOTICE -
For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
OCD058098
button
Manual transaxle