Advertisement
3.2 Assembly Procedures:
Step
S1.Assembly the
Key board
S2.Assembly the
USB BOARD
S3.Assembly the
Bezel and panel
S4. Assembly the
MAIN board and
power board
Figure
11
Remark
Use a Philips-head
screwdriver to tighten 4
screws for locking the
Key board
(No.1~4 screw
size=Q2x2.5,
Torque=0.9±0.4kgf.cm)
Connect the cables of
the USB board
Use a Philips-head
screwdriver to screw 1
screw for locking the
USB board.
(No.1 screw size=M3x6,
Torque=4±1kgf.cm)
Use a Philips-head
screwdriver to screw 5
screws for locking the
BEZEL_BTM and the
Panel.
(No.1~5 screw size=M3x3,
Torque=3±0.5kgf.cm)
Use a Philips-head
screwdriver to screw 20
screws for locking the
middle plastic bezel with
the whole unit, and then
remove the middle
plastic bezel carefully.
(No.1~20 screw
size=M3x4,
Torque=3±0.5kgfxcm)
Advertisement
