Advertisement
S6.Remove the
bezel and panel
S7.Remove the
USB board
S8. Remove the
Key board
10
Use a Philips-head
screwdriver to remove
20 screws for unlocking
the middle plastic bezel
with the whole unit, and
then remove the middle
plastic bezel carefully.
(No.1~20 screw
size=M3x4,
Torque=3±0.5kgfxcm)
Use a Philips-head
screwdriver to remove 5
screws for unlocking the
BEZEL_BTM and the
Panel.
(No.1~5 screw size=M3x3,
Torque=3±0.5kgf.cm)
Use a Philips-head
screwdriver to remove 1
screws to remove the
USB board. Disconnect
the cables of the USB
board
(No.1 screw size=M3x6,
Torque=4±1kgf.cm)
Use a Philips-head
screwdriver to remove 4
screws for unlocking the
key board and the middle
frame. Disconnect the
pin.
(No.1~4 screw
size=Q2x2.5,
Torque=0.9±0.4kgf.cm)
Advertisement
