Sharp SJ-BB04DTXS1-EN User Manual page 12

CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Ice Tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes.
The Plastic Scraper
After some time, frost will build up in certain areas of the freezer. The frost accumulated in the freezer
should be removed regularly. Use the plastic scraper provided, if necessary. Do not use sharp metal
objects for this operation. They could puncture the refrigerator circuit and cause irreparable damage to
the unit.
The Bottle Holder (In some models)
Use the bottle holder to prevent bottles from slipping or falling over.
Adapti-Lift Door Shelf (In some models)
Six different height adjustments can be made to provide storage areas that you need by
Adapti-Lift door shelf.
To change the position of Adapti-Lift door shelf ;
Hold the bottom of the shelf and pull the buttons on the side of the door shelf direction of
arrow. (Fig.1)
Position door shelf the height you need by moving up and down. After you get the position
that you want the door shelf, release the buttons on the side of the door shelf (Fig.2)
Before releasing the door shelf, move up down and make sure the door shelf is fixed.
Note: Before moving door shelf is loaded, you must hold the shelf by supporting the
bottom. Otherwise, door shelf could fall off the rails due to the weight. So damage
may occur on the door shelf or rails.
Visual and text descriptions in the accessories section may vary according to
the model of your appliance.
EN -10-
Fig. 1
Fig. 2