Chapter -3: Using The Appliance - Sharp SJ-BB04DTXS1-EN User Manual

CHAPTER -3: USING THE APPLIANCE

Information on Less Frost Technology
Thanks to the wrap around evaporator, Less Frost technology offers more efficient cooling, less manual defrost
requirement, and more flexible storage room.
Thermostat Setting
The thermostat automatically regulates the temperature inside the refrigerator and freezer compartments. Cooler
temperatures can be obtained by rotating the knob to higher numbers, 1 to 5.
Important note: Do not try to rotate the knob beyond position 1, it will stop your appliance from working.
When lighting and thermostat are positioned
on top
Lamp cover
Thermostat Settings
• Set the knob to a low/medium position, up to 3, for short-term storage of food in the appliance.
• Set the knob to a medium position, 3 or 4, for long-term storage of food in the appliance.
• Set the knob to 5 position for freezing the fresh food. The appliance will run for colder temperatures.
Note that: The ambient temperature, the temperature of freshly stored food, and how often the door is opened
all affect the temperature in the appliance. If required, change the temperature setting.
Temperature Settings Warnings
• The ambient temperature, temperature of the freshly stored food and how often the door is opened affects the
temperature in the refrigerator compartment. If required, change the temperature setting.
• It is not recommended that you operate your fridge in environments colder than 10°C in terms of its efficiency.
• When setting the thermostat, take into consideration how often the appliance doors are opened and closed, how
much food is stored in the refrigerator, and the environment in which the refrigerator is located.
• When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During
this time, do not open the door and do not keep a large quantity of food inside.
• Unplug your appliance during a power cut to prevent damage to the compressor. Once power is restored, delay
plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the appliance's components.
• Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the
climate class stated in the information label. It is not recommended that your fridge is operated in the environments
which are outside of the stated temperature ranges. This will reduce the cooling efficiency of the appliance.
• Your appliance is designed to operate in the ambient temperature (ST/N = 16°C - 38°C) intervals stated in the
standards, according to the climate class displayed on the information label. We do not recommend operating your
appliance out of the stated temperature limits in terms of cooling effectiveness.
Thermostat knob
EN -9-
When lighting and thermostat are positioned
on side
Lamp cover
Climate
Ambient Temperature
Class
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)
Thermostat knob
C
o