Advertisement
Quick Links
VEGA-320 Heat Spreader
Startup Manual
Packing List
Before you start installing your heat spreader, please make
sure that the following items have been shipped:
1 x VEGA-320 heat spreader with thermal pad
1 x Thermal pad attachment
1 x Startup manual
1 x China RoHS
2 x Screws
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Product Pictures
Top View
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the VEGA-320 Heat spreader.
Part No. 2046032010
Printed in Taiwan
Bottom View
1st Edition
January 2020
Dimensions
Below is the dimensions of VEGA-320 heat spreader:
17.00
25.00
Heat Spreader Installation
1. Remove the thermal pad protecting film on VEGA-320
heat spreader
2. Install 2 pcs screws to VEGA-320 heat spreader
VEGA-320_Heat_Spreader Startup Manual 1
2.60
Screw: F/S D=4.5,
H=0.8+M2.5*5L
Unit: mm
Advertisement
Related Manuals for Advantech VEGA-320
Summary of Contents for Advantech VEGA-320
- Page 1 Screw: F/S D=4.5, H=0.8+M2.5*5L 25.00 Unit: mm Heat Spreader Installation 1. Remove the thermal pad protecting film on VEGA-320 heat spreader Top View Bottom View 2. Install 2 pcs screws to VEGA-320 heat spreader For more information on this and other Advantech products, please visit our website at: http://www.advantech.com...
- Page 2 4. After securing the heat spreader to your chassis, remove all the protective film on thermal pad attachment 5. Align one of thermal pad attachment edge to the mark on VEGA-320 heat spreader and install thermal pad 2 VEGA-320_Heat_Spreader Startup Manual...