Advertisement
Quick Links
VEGA-320 Intel
Startup Manual
Packing List
Before you start installing your card, please make sure that
the following items have been shipped:
1 x VEGA-320 card
1 x 1960091939T001 heatsink with thermal pad
1 x Edge AI Suite download card
1 x M.2 screw
1 x Start up manual
1 x China RoHS
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Product Pictures
Top View
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the VEGA-320.
Part No. 2046032000
Printed in China
Movidius
TM
Bottom View
1st Edition
July 2019
Myriad X Edge AI Module
TM
Heatsink Installation
1. Remove the thermal pad protecting film.
2. Check the installation direction as below, the top side of
the VEGA-320 has components which generate heat,
and should contact directly with the thermal pad.
3. Align the notch of the VEGA-320 to the clamp of
heatsink.
VEGA-320 Startup Manual 1
Advertisement
Related Manuals for Advantech VEGA-320
Summary of Contents for Advantech VEGA-320
- Page 1 VEGA-320 has components which generate heat, and should contact directly with the thermal pad. Top View Bottom View 3. Align the notch of the VEGA-320 to the clamp of heatsink. For more information on this and other Advantech products, please visit our website at: http://www.advantech.com...
- Page 2 PCBA is held under the two clamps on the same M.2 2230 A/E Key slot using the screw in the box. side. 5. Gently push the other side of the VEGA-320 down, until the PCBA is held under all the four clamps evenly. 2 VEGA-320 Startup Manual...