Advertisement
2/7/2019
(/wp-content/uploads/2019/01/ping-grease-o-ring.png?x68454)
3. Install the O-ring onto the Ping cable penetrator.
4. Install the Ping cable penetrator on to the end cap in the hole you previously removed the blank penetrator from. Tighten to nger tight,
then use the provided wrench to tighten it an additional ~1/16 of a turn. If you can't loosen it with your ngers, it is tight enough.
(/wp-content/uploads/2019/01/ping-end-cap.png?x68454)
https://www.bluerobotics.com/learn/ping-installation-guide-for-the-bluerov2/
Ping Installation Guide for the BlueROV2 - Blue Robotics
8/21
Advertisement
Need help?
Do you have a question about the Ping and is the answer not in the manual?
Questions and answers