Honeywell HWC775 Series Owner's Manual page 7

RESETTING YOUR HUMIDIFIER
Situation
Water Tank Removed
Tank Empty
Mineral Buildup on Heating Element
2-WAY MIST OUTLET
This humidifier features a 2-Way Mist Outlet that allows
you to direct mist in in two directions. Positioning both
openings in the same direction results in a strong
mist plume into the room. Separating the mist outlets
allows for pointing the mist in two directions for wider
distribution.
USING THE ESSENTIAL OIL CUP
This humidifier features an Essential Oil Cup that can
be used with your favorite essential oil or liquid inhalant
(like Vicks VapoSteam®) for added enjoyment. The cup
is heated to help evaporate the oil. This is not a diffuser
– the oil does not come in contact with the water but
is passively evaporated into the air. Essential oil and
inhalant are not included.
1. Add a few drops of essential oil or liquid inhalant in the Essential Oil Cup.
WARNING: DO NOT ADD ESSENTIAL OILS, LIQUID INHALANTS OR ANY ADDITIVES TO THE WATER.
DOING SO CAN DAMAGE THE HUMIDIFIER AND VOID THE WARRANTY.
2. To clean the Essential Oil Cup, wait 5 minutes for it to cool. Then gently wipe residue from the cup with a
soft cloth.
HARD WATER AND YOUR HUMIDIFIER
High mineral content in your water, also known as hard water, may cause a white mineral residue to accumulate
on surfaces in the room near the humidifier. This mineral residue is commonly referred to as white dust. The
higher the mineral content (hardness) of your water, the greater the potential that an ultrasonic humidifier may
produce white dust.
With warm mist humidifiers the minerals can cling to the heating element which can prevent it from running
efficiently. It is important to clean the Heating Element and Nebulizer regularly.
White dust is not a result of a defect or flaw in the humidifier. It is a result of the amount of minerals suspended in
the water you are using. Tap water can be diluted with distilled water to reduce white dust.
Reset Light
Illuminates Orange
Illuminates Orange
Blinks Red
1
7
How to Reset
Replace Tank on Base
(must contain water)
Fill Tank and Replace on Base
See Cleaning Instructions
2