Draytek Vigor 2950 User Manual page 33

D e t a i l s
D e t a i l
To use PPTP/L2TP as the accessing protocol of the internet, please choose Internet Access
from WAN menu. Then, select PPTP/L2TP mode for WAN2/WAN2. The following web
page will be shown.
PPTP/L2TP Client
Mode
ISP Access Setup
ISDN Dial Backup
Setup
PPP Setup
Vigor2950 Series User's Guide
P a g e f o r P P T P / L
s P a g e f o r P P T P / L
Click Enable PPTP to enable a PPTP client to establish a tunnel
to a DSL modem on the WAN interface.
Click Enable L2TP to enable a L2TP client to establish a tunnel
to a DSL modem on the WAN interface.
Click Disable to disable PPTP/L2TP client mode. All the settings
configured in this page will be invalid.
Server Address - Specify the IP address of the PPTP server.
Specify Gateway IP Address - Specify the WAN IP address for
the router.(這個位址設定主要是為了什麼？？)
Username -Type in the username provided by ISP in this field.
Password -Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup - You can type in four sets of time
schedule for your request. All the schedules can be set previously
in Application – Schedule web page and you can use the number
that you have set in that web page.
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. （去哪裡設定 profile 呢？）
None - Disable the backup function.
Packet Trigger -The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for i model only.
PPP Authentication - Select PAP only or PAP or CHAP for PPP.
Idle Timeout - Set the timeout for breaking down the Internet after
passing through the time without any action. This setting is active
2 T P
2 T P
27