Download Print this page
MicroImage Video Systems ENC400B Operation Manual

MicroImage Video Systems ENC400B Operation Manual

Video encoder

Advertisement

Quick Links

MicroImage Video Systems warrants that each ENC400B is free from
defects due to faulty materials or improper workmanship for a period of
one (1) year. MicroImage Video Systems further warrants that any part
which proves defective in materials or workmanship within one (1) year,
will be replaced or repaired at no cost to the user. Labor to replace
defective parts will be done without charge, provided the equipment is
returned to MicroImage Video Systems prepaid, insured and properly
packaged. Prior return authorization must be obtained from MicroImage
Video Systems.
NOTE
This warranty covers the MicroImage ENC400B only.
CONDITIONS
This warranty is void if the warranted part has been altered or subjected
to abuse or misuse. Defective parts must be returned to MicroImage
Video Systems.
SOLE WARRANTY
This Warranty is in lieu of all other warranties expressed or implied
including, without limitation, any implied warranty or any implied
warranty of fitness for a particular purpose. MicroImage Video Systems
shall have the final right to determination as to the existence and cause of
any defect and its appropriate adjustment in accordance with the terms of
this warranty. In no event shall MicroImage Video Systems be liable for
any consequential or collateral damages.
All returns MUST have an RMA number. Please call, fax or email for an
RMA form. The RMA form will have the proper shipping address for
returns.
Phone
610-754-6800
Fax
610-754-9766
Email
techsupport@mivs.com
WARRANTY
RETURNS
Page 4
Video Encoder
Operation Manual
RGB to NTSC and S-Video Encoder
Model ENC400B
MicroImage Video Systems
division of World Video Sales Co., Inc
PO Box 331
Boyertown, PA 19512
Phone 610-754-6800
Fax 610-754-9766
sales@mivs.com
www.mivs.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENC400B and is the answer not in the manual?

Questions and answers

Summary of Contents for MicroImage Video Systems ENC400B

  • Page 1 In no event shall MicroImage Video Systems be liable for any consequential or collateral damages.
  • Page 2 (C) 0.28 Vpp burst typical into 75 ohm Connectors (R, G, B, S, Video) BNC female The ENC400B is set from the factory to work with external sync. An (S-Video) 4 pin mini DIN F internal jumper can be changed to select internal (sync on green).

This manual is also suitable for:

Bl-enc400b