Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0486, 7160-0487
TOUGHPAD FZ-G1 Docking Station
This instruction sheet is for the TOUGHPAD FZ-G1 docking station only. For instructions
on features, set-up, and operation of the TOUGHPAD FZ-G1 computer, please refer to
the manual provided by Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with
each individual product.
This instruction sheet is for the following products:
Item No. 7160-0486-00(-P)(-E) Keyed alike, No RF
Item No. 7160-0486-02(-P)(-E) Keyed alike, Dual RF
Item No. 7160-0486-03(-P)(-E) Keyed different, No RF
Item No. 7160-0486-04(-P)(-E) Keyed different, Dual RF
Item No. 7160-0487-00(-P)(-E) Keyed alike, No RF
Item No. 7160-0487-02(-P)(-E) Keyed alike, Dual RF
Item No. 7160-0487-03(-P)(-E) Keyed different, No RF
Item No. 7160-0487-04(-P)(-E) Keyed different, Dual RF
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2016 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. G
Printing Spec: PS-004
Form
INST-596
1/5
Advertisement
Related Manuals for Gamber Johnson 7160-0486
Summary of Contents for Gamber Johnson 7160-0486
- Page 1 Installation instructions for other Gamber-Johnson products are provided with each individual product. This instruction sheet is for the following products: Item No. 7160-0486-00(-P)(-E) Keyed alike, No RF Item No. 7160-0486-02(-P)(-E) Keyed alike, Dual RF Item No. 7160-0486-03(-P)(-E) Keyed different, No RF Item No.
- Page 2 PRE-INSTALLATION RECOMMENDATOINS Conduct a "Bench Test" Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: Make sure the computer is operational by itself. Insert computer into the docking station and verify that the computer is operating in the dock.
- Page 3 RF connections are configurable in the BIOS of the computer. The terms "UPPER" and "LOWER" positon used in the BIOS of the computer correlates with Gamber Johnson TOUGHPAD FZ-G1 Docking Station "Ant 1" and "Ant 2" as follows: "UPPER" = "Ant 1" and "LOWER" = "Ant 2".
- Page 4 DOCKING AND UNDOCKING THE COMPUTER Figure 1 1. Turn the computer off. Vertical Walls 2. With the slide plate in the open Guide Block position, insert the bottom of the computer into the docking station. Make sure the guide tabs are lined up with the pockets on the back side of the Guide tabs computer.
- Page 5 Regulatory Certification Information Regulatory Model #: 7160-0486 GJ Model #'s: 7160-0486-00, 7160-0486-02, 7160-0486-03, 7160-0486-04 7160-0486-00-P, 7160-0486-02-P, 7160-0486-03-P, 7160-0486-04-P 7160-0487-00, 7160-0487-02, 7160-0487-03, 7160-0487-04 7160-0487-00-E, 7160-0487-02-E, 7160-0487-03-E, 7160-0487-04-E Descriptions: Dock-Panasonic-FZG1 Certifications: • EN 55022:2010 CISPR 22:2008 Class B • EN 50498:2010 •...