Technics AirPRO Operator's Manual

Use the AirPRO instead of ER collet nuts to provide enhanced dust
removal capability to your machine. Use only with on-size precision ER
collets to ensure proper performance.
During operation, the AirPRO produces a powerful air-stream that
evacuates dust from nested cutting operations before it has a chance
to accumulate.
• AirPRO features PowerCOAT Technology for 70%
greater holding power and longer cutter life
• ER Collets snap into AirPRO just like a collet nuts
• Use with ER32 and ER40 collet chucks
• Works with standard router bits

AirPRO Specifications

Part No. Description
453200 ER32 AirPRO
454000 ER40 AirPRO
452500 SYOZ25 AirPRO

AirPRO Operating Parameters

Part No. Description
453200 ER32 AirPRO
454000 ER40 AirPRO
452500 SYOZ25 AirPRO
Warranty: AirPRO is guaranteed to perform as described, but must be used with on-size precision ER collets and tightened
to torque specifications above using a tightening stand, torque wrench and proper adapter or warranty becomes invalid.
Operator's Manual
Min RPM Max RPM
18,000 24,000
18,000 24,000
18,000 24,000
Optimal Gap Max Chip Load
.070"
.070"
.070"
Always tighten the AirPRO to proper torque specification
using a torque wrench and tightening stand.
D
H
L
D L
1.97" 3.77"
2.48" 4.06"
2.36" 3.92"
Wrench
.020" 200TH
.020" 200TH
.020" 200TH
h
H h Weight
1.77" 1.24" 1.1 lb
1.81" 1.13" 1.4 lb
1.97" 1.13" 1.3 lb
Adapter Torque
04604-32 100 lb.ft
04605-40 130 lb.ft
03690-25 90 lb.ft