Listening To Music - Sony XBA-BT75 Operating Instructions Manual

OPERATING THE UNIT

Listening to music

+/– button
This unit supports SCMS-T content
protection. You can enjoy music, etc.,
from a device such as a mobile phone
or portable TV that supports SCMS-T
content protection.
Check the following before operating
the unit.
– The Bluetooth device is turned on.
– Pairing of this unit and the
Bluetooth device is complete.
– The Bluetooth device supports the
transmitting music function (profile:
A2DP*).
1
While this unit is turned off,
press and hold the
function) button for about two
seconds, until the indicator
(blue) flashes twice.
The unit is turned on and the
indicator (blue) flashes slowly (or
flashes twice).
0
US
(Multi function) button
(Multi
Note
After the unit is turned on, it attempts to
connect to the last connected Bluetooth
device automatically with HFP or HSP.
When not calling with this unit, do not
make the last connected Bluetooth
device ready for HFP or HSP
connection. To make or receive a call
while playing back music, see page 25.

Make the Bluetooth connection
(ADP) from a Bluetooth device
to this unit.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.

Start playback on the Bluetooth
device.
Tip
A2DP Bluetooth connection can also be
performed with the
button, except when making a call on this
unit.
Notes
 When you play music by connecting the
unit to a Bluetooth device using HSP,
sound quality will not be optimal. For
better sound, change the Bluetooth
connection to A2DP by operating the
Bluetooth device.
 If this unit is turned off while an A2DP
Bluetooth connection is established,
operate the unit again from step 1 to make
the A2DP Bluetooth connection again.
* For details on profiles, see page 6.
(Multi function)