Sony XBA-1 Operating Instructions

How to use / Utilización
Stereo
Headphones
Operating Instructions
Manual de instrucciones
4-277-937-11(1)
©2011 Sony Corporation
Printed in Thailand
XBA-1
Hybrid silicone rubber earbuds Noise isolation earbuds
Almohadillas de caucho de Almohadillas de aislamiento de ruido
silicona híbridas
Pressure-relieving
urethane cushion
Almohadilla de uretano
con alivio de presión
SS S M L S M L
English Stereo headphones
Features Specifications
 Newly developed Balanced Armature Type: Closed, Balanced Armature
driver unit Driver unit: Balanced Armature
Newly developed micro-size driver unit (full- Power handling capacity: 100 mW (IEC*)
range) reproduces smooth and clear vocal Impedance: 24 Ω at 1 kHz
sound. Sensitivity: 108 dB**
 Newly developed Double Layered Frequency response: 5 Hz – 25,000 Hz
Housing Cord: 1.2 m (47 1 / in), OFC litz cord neck-chain
4
Liquid Crystal Polymer inner housing and Plug: Gold-plated L-shaped stereo mini plug
special ABS outer housing reproduce clear, Mass: Approx. 3 g (0.11 oz) (without cord)
distortion-free mid-high range.
Supplied accessories
 Noise-blocking design Hybrid silicone rubber earbuds: SS (red) (2), S
Noise-blocking design attenuates ambient
(orange) (2), M (green) (attached to the unit at
noise and sound leakage. the factory) (2), L (light blue) (2) / Noise
 Super-small body isolation earbuds: S (orange) (2), M (green) (2),
Balanced Armature driver unit allows for a
L (light blue) (2) / Cord adjuster (winds cord up
super small body, and ultimate wearing to 50 cm (19 / in)) (1) / Carrying pouch(1)
3
4
comfort.
* IEC = International Electrotechnical Commission
 Earbuds ** 150 mV input
4 sizes of hybrid silicone rubber earbuds (SS,
Design and specifications are subject to change
S, M, L), for secure fit and long-term wearing without notice.
comfort.
Optional replacement earbuds can be ordered
3 sizes of noise isolation earbuds (S, M, L),
from your nearest authorized Sony retailer or
for effective attenuation of ambient noise.
www.sony.com.
About noise isolation earbuds Removing the headphones
Supplied noise isolation earbuds provide a snug After use, remove the headphones slowly.
fit for effective attenuation of ambient noise. Note
Notes Headphones are designed to fit closely in your
 Prolonged use of snugly fitting earbuds may ears. If the headphones are pressed hard while in
strain your ears. If you experience discomfort, use or taken off too quickly, they may cause
discontinue use. injury.
 The pressure-relieving urethane cushion is Wearing headphones may produce a diaphragm
extremely soft. If it breaks or detaches from click sound. This is not a malfunction.
the earbuds, it will not take its correct
position and the earbuds will lose their noise
isolation function.
 The urethane cushion may deteriorate over
time. If the pressure-relieving power is lost
and the urethane cushion hardens, the
earbuds may lose their noise isolation
function.
 Do not wash the earbuds. Keep them dry,
otherwise they may deteriorate quickly.
About hybrid silicone rubber
earbuds
Keep earbuds clean. To clean the earbuds, wash
them with a mild detergent solution.
Precautions
High volume may affect your
hearing. For traffic safety, do
not use while driving or
cycling.
Install the earbuds firmly. If an
earbud accidentally detaches
and is left in your ear, it may
cause injury.
 Do not leave the stereo headphones in a
location subject to direct sunlight, heat or
moisture.
Note on static electricity
Static electricity accumulated in the body may
cause mild tingling in your ears.
To minimise the effect, wear clothes made from
natural materials.