Maintenance/Parts Replacement; Replacement - Drolet ESCAPE 1800 Installation And Operation Manual

7. Maintenance/Parts Replacement

7.1

Replacement

The glass used is a ceramic glass, 5/32" (4 mm) thick, 15 ⅞" x 9 ⅞" (403 mm x 251 mm), tested
to reach temperatures up to 1400º F. If the glass breaks, it must be replaced with one having
the same specification.
THE IMAGES SHOWN ARE FOR GUIDANCE ONLY AND MAY BE DIFFERENT FROM YOUR PRODUCT,
1. Remove the door (E) from its hinges and lay it on a soft, flat surface.
2. Remove the six screws (A), the six glass retainers (B), and the metal frames (C).
3. Remove the glass (D). If it is damaged install a new one in place. The replacement glass must
have a gasket all around (see procedure below).
4. Reinstall the glass, being careful to centre the glass in the door and not to over-tightening the
retaining screw.
The two main causes of broken door glass are uneven placement in the door and over-tightening
the retaining screws.
Page 30
Do not clean the glass when the stove is hot.
Do not abuse the glass door by striking or slamming shut.
Do not use the stove if the glass is broken.
BUT THE ASSEMBLY REMAINS THE SAME.
D
E
A
B
C
Installation and Operation Manual - Wood Stove