To Install Or Replace Battery - Zephir ZHS415 Instruction Manual

TO INSTALL OR REPLACE BATTERY

The battery type of scale depends on the product store. Find the battery type of your scale according to the following
pictures, then install and replace battery as described.
1. 1x3V CR2032 lithium battery (included). Remove isolation sheet before use;
2. 2x1.5V (AA/AAA) batteries (excluded). Remove package foil before use.
DISPLAY
Open the battery case cover at the bottom of scale.
A. Take out the used battery with the aid of a sharp object, as shown in picture.
B. Install the new battery by putting one of the battery beneath the battery baffle and
then pressing down the other side (The positive pole should be upward).
Open the battery case cover at the bottom of scale.
A. Take out the used battery with the aid of a sharp object if needed.
B. Install the new battery by putting one of the battery down first and then pressing
down the other side (Please observe the polarity).