Cub Cadet Pro Z 900 Series Operator's Manual page 18

Standard set-up
Stems (Dandelion, Bahia, Buckhorn, etc.)
Very Lush &/or tall grass
Low cut height (1 to 2")
Mulch
Material collection
Abrasive (sandy), dry
Wet
Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.
Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for precision cutting.
Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be removed for mulching.
Gauge Wheels: The gauge wheels reduce scalping, help with precision cutting and reduce turf defacement during turns.
Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.
Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.
Discharge Chute: The discharge chute controls the mower deck discharge and enhances the discharge pattern
NOTE: To avoid damaging grass, no more than 1⁄3 of the grass height should be removed during a single cutting (i.e. if the grass is 6" tall, cut it to 4").
18 S 3 — c
ection ontrolS
Reconfigurable Mower
Inner Baffle
Installed
Removed
Removed
Installed
Installed
Installed
Removed
Installed
& o
peration
Discharge
Baffle Cutting Blades Gauge Wheels
Installed Hi-lift
Installed Hi-lift
Installed Hi-lift
Installed Low-lift
Removed Hi-lift/Mulch
Installed Hi-lift
Installed Low-lift
Installed Hi-lift
Front Roller
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
Rear Rollers
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low = 3 to 5"
High = 1 to
2-1⁄2"
High = 1 to
2-1⁄2"
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low = 3 to 5"