Leds - Biostar B550M-SILVER Manual

2.8 LEDs

LEDs
Below LEDs are controlled by RACING GT EVO program. Please refer to Chapter 3.3 for more
detail software setting.
EZ Debug LED: Debug LED Indicators
This LEDs indicate the status of the motherboard.
Note
» After starting the computer, the LED indicators will light up in the following order:
DRAM → CPU → VGA → BOOT
» When the computer is ready, the LED indicator will show where the error occurred and will stay on
until the problem is solved.
• RGB LED Header (5V/ 12V)
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates booting device is not detected
or fail.
B550M-SILVER
Chapter 2: Hardware installation | 21