Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Seneca R-GWR
Summary of Contents for Seneca R-GWR
- Page 1 INSTALLATION MANUAL R-GWR Modbus TCP/RTU radio Hub SENECA s.r.l. Via Austria, 26 – 35127 – PADOVA – ITALY Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287 For manuals in other languages and the configuration software, visit www.seneca.it/products/r-gwr MI00548-1-EN...
-
Page 2: Module Layout
WARNING: The full content of this manual must be read before any operation. The module must only be used by qualified electricians. Specific documentation is available at www.seneca.it/products/r-gwr The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to electrostatic discharges. -
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS ETSI EN 301 489-1 v.2.2.3 STANDARDS ETSI EN 301 409-3 v.2.1.1 EN 60950 POWER SUPPLY Voltage 10 – 40 Vdc, 19 - 28 Vac, 50 - 60 Hz Absorption 1 W Max. INSULATION Screw terminals, 7-way removable screw terminals, 5 mm pitch (*) Screw terminals, 2-way removable screw terminals, 5 mm pitch (*) CONNECTIONS Ethernet connector... -
Page 4: Device Configuration
DEVICE CONFIGURATION R-GWR can be fully set up via integrated web server. The product programming and/or configuration tools, as well as all the manuals, can be downloaded at the web address: www.seneca.it/products/r-gwr. For further information, refer to the USER manual that can be downloaded from the above site. -
Page 5: Electrical Connections
Ethernet port. To reboot the device, keep the key pressed for 5 seconds. Release it when all the LEDs light up. RJ45 Ethernet port: The R-GWR has an Ethernet 100 port with RJ45 connector in the lower part of the module. -
Page 6: Wall Mounting
INSTALLATION ON DIN-IEC EN 60715 RAIL Installation: Position the device on the OMEGA rail resting the upper teeth from top to bottom. Push the lower part towards the rail until the locking system engages. Removal: Turn off the module, with the help of a slotted screwdriver unlock the locking system. WALL MOUNTING Installation: The device is provided with a hole for wall-mounting. -
Page 7: Contact Information
Product information sales@seneca.it This document is the property of SENECA s.r.l. Copies and reproduction are prohibited unless authorised. The content of this document corresponds to the described products and technologies. Stated data may be modified or supplemented for technical and/or sales purposes. - Page 8 NOTES...
Need help?
Do you have a question about the R-GWR and is the answer not in the manual?
Questions and answers