Advertisement
Technical specifications
Laser class
Output power (mW)
Measuring range (m)
Wavelength (nm)
Accuracy of bubble level (
Accuracy of construction laser (
Power supply
Description
Whether you want to hang papers, place lamps in the cen-
tre of a room, fix curtain rails, lay parquet or laminate, this
cross-line laser is your ideal assistant, helping you to accu-
rately do all these works. Being self-levelling, the device
can generate vertical, horizontal, or cross-shaped lines that
are always absolutely straight. Thus, objects can be place
at the desired spot on floors, walls, and ceilings.
With the tripod included, the laser can be adjusted to the
desired height, making work flexible especially in closed
rooms.
The laser unit and the tripod come inside a box that the
device can easily and safely be transported with.
Assembly
Unfold the tripod and place it on a level and straight sur-
face. Make sure that the tripod cannot tilt over. Use the tel-
escopic sticks to compensate for unevenness of the sur-
face. Align the tripod with the help of the bubble level on
the upper side.
Screw the base on the tripod. The construction laser can
be used with or without the tripod.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
II
1
3–10 (depending on the light intensity in the working area)
650
⁄
mm
)
1.0
m
line: ±0,5
⁄
mm
)
m
cross: ±0,5
2 × 1.5 V AA batteries (not included)
Item 51714
Page 5
07
2021-1
Advertisement
