Download Print this page

WilTec 51714 Instruction Manual page 3

Cross-line laser

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Intended use
This device emits a visible laser beam that allows for example to do the following measurement tasks:
determining heights, right angles, orienting horizontal and vertical reference planes, and perpendicular
points.
Safety instructions
Obey the instructions of this manual.
Read the manual before using the device.
Do not open this device in a damp or wet area or with yourself being wet and protect it from
direct sunlight.
Ensure sufficient cooling by ambient air et avoid heat accumulation.
To clean the device, only use a damp cloth for cleaning. Avoid using cleaning agents and make
sur that liquids may not enter the device.
The inner parts of the device do not contain components requiring maintenance by the user.
Leave all maintenance, control, and repair works to a qualified person. With an unqualified per-
son intervening, the 2-years warranty will expire. Keep these operation instructions in a safe
place.
Never look into the laser beam, either directly or with optical instruments. There is a risk of eye
injury.
Never direct the laser beam toward persons or animals.
The laser level must be above eye height.
Never open the housing. Leave any repair work to authorized specialised dealers.
Do not remove warning and safety notices.
Do not allow that children use this device.
Do not operate the device in explosive areas.
Before using a construction laser, you should know about its fundamental features and the potential
risks that a rotary or cross-line laser might cause. It is essential to take the necessary safety measures
to avoid any kind of danger or accident potentially arising from construction lasers being operated.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 51714
Page 3
07
2021-1

Advertisement

loading