Introduction; Product Safety Notice - Mitsubishi Electric WD-52527 Service Manual

This service manual provides service instructions for LCD Projection TV Models and Chassis:
V28 Chassis
WD-52527
WD-62527
This service manual includes:
1. Assembly and disassembly instructions for the front and rear cabinet components.
2. Servicing of the Lenticular Screen and Fresnel Lens.
3. Servicing down to major components, chassis, PWBs, Light Engine, Lamp Ballast, etc..
4. Electrical adjustments.
5. Optical Adjustments.
6. Lead Free Soldering.
7. Chip parts replacement procedures.
8. Simplified circuit path diagrams.
The parts list section of this service manual includes:
1. Cabinet and screen parts.
2. Electrical parts.
Block diagrams of the above listed models are included in this service manual for better understanding of the circuitry.
Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac-
teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by
using replacement components rated for higher voltage, wattage, etc.
Replacement parts which have special safety characteristics are identified in this service manual.
Electrical components having such features are identified by shading on the schematic diagram and by bold type in
the parts list of this service manual. Therefore, the replacement for any safety part should be identical in value
and characteristics.
The PWBs used in the V28 and V28+ chassis are constructed using Lead-Free solder. When
Pb Solder
servicing use only recommended Lead-Free solder (refer to page 37).
CableCARD is a trademark of Cable Television Laboratories, Inc.
TV Guide On Screen is a registered trademark of Gemstar Development Corp.
HDMI is a trademark of HDMI Licensing, LLC.
All manuals and user guides at all-guides.com
MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

INTRODUCTION

V28+ Chassis
WD-52528
WD-62528

PRODUCT SAFETY NOTICE

Page 5