Triax EoC return path filter Quick Manual page 2

3. Make a new coax cable and mount it
between the TV in on the amplifier
and the TV OUT TO amplifier on
the return path filter.
1. Take the TV in coax cable from the
amplifier and mount it to the IN – TV
+ EoC on the return path filter.
How to install EoC
return path filter
Amplifier
Amplifier
GND terminal for safety earth bonding (supported in 383910)
4. Make a new coax cable and mount it
between the TV out on the amplifier
and the TV in from amplifier on the
return path filter.
Power Pass (supported in 383910)
EoC 200 MHz
Return Path
2. Take the TV out coax cable from the
filter
amplifier and mount it to the OUT –
TV + EoC on the return path filter.
TV signal