Technical Data - Yamato EP 710/82K Instruction Manual

cod. 52630

1. TECHNICAL DATA

Model:
Code:
Voltage:
Power:
Rpm:
Cutting width:
Cutting depth:
Weight:
vibration: weighted acceleration m/s2. K=1,5
sound power level LpA dB (A) K=3 dB(A)
Sound pressure level LwA dB(A) K=3 dB(A)
2. INTENDED USE
The electric Planer it serves as a wood planer.
Every other use out of norms confomity and regulations inside this manual can seriously damage
the machine and put the user in life danger. To protect the guarantee rights for the product's
security it is recommended the righteous observance of security warnings. Due to product's
construction carachteristics, every remaining risk can not be excluded.
3. GENERAL SAFETY REGULATION
• Read this manual carefully before operation to avoid the hazards such as electric
shock, burn of fire.
• The work area must be kept clean to avoid danger.
• Pay attention to the environment, do not expose the tool in rain or humid place. Keep
work area lit up. Don't use the tool in presence of inflammable liquid or gas.
• Pay attention to do not touch the grounding parts, pipes, heat elements, so that to
avoid electric shock.
• Take care of the tool. Put it in dry place when not in use, and far from children.
• Don't overload the tool. Operate only within the load level suggested.
• Dress properly : Don't wear loose clothing or jewelry because they can be caught in
moving parts. Rubber gloves and non-skid footwear are recommended when working.
Wear protective hair covering to contain long hair.
• Use safety glasses and dust musk if operation is dirty.
• Never carry the tool by cord or yank it to disconnect from receptacle. Keep cord far
from heat, oil and sharp edges.
• Secure work. Use clamps or vise to hold work. It's safer than using your hand and it frees
both hands to operate tool.
• Keep proper footing and balance at all times.
• Keep tool sharp and clean for better and safe performance. Follow instructions for
lubricating and changing accessories. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean and free from oil and grease.
• Disconnect tool when not in use, before serving and when changing accessories, such
as bits.
• Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from tool before turning it on.
• Avoid unintentional starting. Don't carry plugged-in tool with finger on switch. Be sure
that the switch is off when plugging in.
ENGLISH
EP 710/82K
52630
230V (50 Hz)
710 Watt
16.000 r/min
82 mm
2 mm
2.6 kg
3,777
87,2 dB(A)
98,2 dB(A)
14