Swann activair SH16810N Manual page 8

OPERATION
Emptying the Drainage Tank
1. Lightly press on the sides of the tank with both hands
and pull the tank out gently.
2. Discard the collected water.
3. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene, thinner,
or other solvents, as these can scratch and damage the tank and cause water leak-
age
4. When replacing the drainage tank, press the tank firmly into place with both
hands. If the tank is not positioned properly, the "TANK FULL" sensor will be acti-
vated, and the dehumidifier will not operate.
8
SH16810N_IM.indd 8 06/05/2020 09:23