Advertisement
SEN01344-00
3.
Filing method
File by the brochures in the correct order of the form number printed in the shop manual composition
table.
Revised edition mark
q
When a manual is revised, the ones and tens digits of the form number of each brochure is
increased by 1. (Example: 00, 01, 02 ...)
Revisions
q
Revised brochures are shown in the shop manual composition table.
4.
Symbols
Important safety and quality portions are marked with the following symbols so that the shop manual will
be used practically.
Symbol
k
a
4
3
2
5
6
5.
Units
In this shop manual, the units are indicated with International System of units (SI). For reference, con-
ventionally used Gravitational System of units is indicated in parentheses { }.
8
Item
Safety
Special safety precautions are necessary when performing work.
Special technical precautions or other precautions for preserving stan-
Caution
dards are necessary when performing work.
Weight of parts of component or parts. Caution necessary when
Weight
selecting hoisting wire, or when working posture is important, etc.
Tightening
Places that require special attention for tightening torque during
torque
assembly.
Coat
Places to be coated with adhesives, etc. during assembly.
Oil, coolant
Places where oil, etc. must be added, and capacity.
Drain
Places where oil, etc. must be drained, and quantity to be drained.
00 Index and foreword
Remarks
BR380JG-1E0
Advertisement
