Spectro Swing - Operating Manual
2.1.2 Installing on a PC with Microsoft Windows XP or newer
There are two drivers to be installed for the connection between your
computer and Spectro LFP:
A.
High speed USB to serial converter
B.
USB virtual serial port driver
Switch off the Spectro Swing.
Insert the supplied CD-Rom/USB Stick into your computer, run the
"Barbieri Gateway software installer" or the "USB Driver Setup program"
and follow the instructions.
The installation procedures are guided automatically by an installation
wizard.
Check if driver is correctly installed
•
Switch on instrument
•
Open "Control Panel", "System"
•
Select "Hardware" and click "Device Manager".
•
Look into "Ports" and "Universal Serial Bus controllers".
9