Installing The Hardware; Product Registration - Barbieri Spectro Swing Operating Manual

Spectro Swing - Operating Manual

2.2 Installing the hardware

Installing the connecting cables:
• The power supply for the spectrophotometer is connected to the plug
placed on the right side of the instrument near the On/OFF switch
• Connecting the instrument to the computer with the supplied USB cable

2.3 Product registration

It is recommended to register your instrument with Barbieri electronic
in order to get access to privileged information like access to download
area, product information/ firmware updates etc.
Registration can be done through the Barbieri Gateway measuring
software or manually by registering on the Barbieri web site:
www.barbierielectronic.com
10