Advertisement
Quick Links
©2021 Open Date Equipment Ltd. All rights reserved.
TC2-ES PSU V1 - POW763200 REV A
OPERATING INSTRUCTIONS
USER INFORMATION
TC2-ES POWER SUPPLY V1
Designed and manufactured by:
OPEN DATE EQUIPMENT LIMITED
UNIT 9 PUMA TRADE PARK
145 MORDEN ROAD
UNITED KINGDOM
Tel: 0044 (0) 20 8655 4999
Email:
sales@opendate.co.uk
Web site:
MITCHAM
SURREY
CR4 4DG
www.opendate.com
June 2021
Page 1
Advertisement
Related Manuals for Open Date Equipment TC2-ES
Summary of Contents for Open Date Equipment TC2-ES
- Page 1 TC2-ES PSU V1 - POW763200 REV A OPERATING INSTRUCTIONS USER INFORMATION TC2-ES POWER SUPPLY V1 Designed and manufactured by: OPEN DATE EQUIPMENT LIMITED UNIT 9 PUMA TRADE PARK 145 MORDEN ROAD MITCHAM SURREY CR4 4DG UNITED KINGDOM Tel: 0044 (0) 20 8655 4999 Email: sales@opendate.co.uk...
-
Page 2: Table Of Contents
Dimensions Introduction The TC2-ES is a direct replacement for the earlier HS series power supplies used with Open Date Thermocode 2 series printers. The unit has been designed to make installation, on-site servicing and replacement as easy as possible with these key advantages: ... -
Page 3: Safety Instructions
If cables are damaged or frayed. b. If liquid has been spilled onto the product. c. If the product does not operate normally when these instructions are followed. ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 3... -
Page 4: Front Panel
Relay 2 energised. Relay 3 energised. *The 5 & 9V supplies are derived from the 24V supply. If fuse F1 blows the 5 and 9V supplies will not be present. ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 4... - Page 5 Volt free trigger. Voltage trigger. Voltage trigger. RELAY 1/2/3 (J1,2,3) Common terminal. Normally closed. Connected COM when relay is not energised. Normally open. Connected to COM when relay is energised. ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 5...
-
Page 6: I/O Connection Details
COM is connected to NC when the relay is not energised. COM is connected to NO when the relay is energised *If Issues with Voltage triggering are noted an additional Voltage Isolation relay may be installed. ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 6... -
Page 7: Location Of Fuses And Print Trigger Mode Setting
Printing is triggered at the end of a trigger pulse (trailing edge). The jumper link must be fitted to position A or B. A trigger pulse will not be generated if the link is not fitted. ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 7... -
Page 8: Internal Layout
(page 7) 24V PSU Module (POW783006) I/O Terminals (pages 5 & 6) Horizontal Drive (PCB782026) Main PCB (ASY763220) Cooling Fan (FAN783007) Detachable I/O Vertical Drive Cable Gland ASSY. (PCB782026) ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 8... -
Page 9: Block Diagram
Block diagram ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 9... -
Page 10: Dimensions
Dimensions ©2021 Open Date Equipment Ltd. All rights reserved. June 2021 Page 10...