Sony DR-BT21IK/B Instruction Manual page 34

 Microwaves emitting from a Bluetooth
device may affect the operation of
electronic medical devices. Turn off
this unit and other Bluetooth devices
in the following locations, as it may
cause an accident.
where inflammable gas is present,
–
in a hospital, train, airplane, or a
petrol station
– near automatic doors or a fire alarm
 This unit supports security capabilities
that comply with the Bluetooth
standard to provide a secure
connection when the Bluetooth
wireless technology is used, but
security may not be enough depending
on the setting. Be careful when
communicating using Bluetooth
wireless technology.
 We do not take any responsibility
for leakage of information during
Bluetooth communication.
 Connection with all Bluetooth devices
cannot be guaranteed.
– A device featuring Bluetooth
function is required to conform to
the Bluetooth standard specified
by Bluetooth Sig, Inc. and be
authenticated.
– Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specifications of the device.
 Depending on the device to be
connected, communication may take
some time.

US
On safety
 Do not drop, hit, or otherwise expose
the product to strong shock of any kind.
This could damage the product.
 Do not disassemble or attempt to open
any parts of the product.
On placement
 Do not place the product in any of the
following locations.
– Direct sunlight, near a heater, or
other extremely high-temperature
location
– Dusty location
– An unsteady or inclined surface
– Location exposed to large amounts
of vibration
– Bathroom or other high-humidity
location
– In a car subject to the direct rays of
the sun
Note on using in a car
Do not attempt to connect this
product, or to operate this product,
an audio output device or a car radio
while driving or waiting at a traffic
signal.
Cleaning
Clean the product with a soft, dry
cloth, or a soft cloth lightly moistened
with a mild detergent solution. Do not
use any type of solvent, such as alcohol
or benzene, which may damage the
finish.