Controlling The Bluetooth Mobile Phone - Hfp, Hsp - Sony DR-BT160AS Operating Instructions Manual

To stop use
1
Terminate Bluetooth
connection by the
Bluetooth mobile phone.
2
Press and hold the
POWER button for about
2 seconds to turn off the
power.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Controlling the
Bluetooth mobile
phone – HFP, HSP
The operation of the buttons on this
unit varies depending on your
mobile phone.
HFP (Hands-free Profile) or HSP
(Headset Profile) is used for
Bluetooth mobile phone. Refer to
the operating instructions supplied
with your Bluetooth mobile phone
on supported Bluetooth profiles or
how to operate.
HFP (Hands-free Profile)
Status
Standby
Voice Dial
active
Outgoing call
Incoming call
During call
22
US
Multi function button
Short Press Long Press
Start Voice Last number
1
Dial* redial
Cancel Voice –
1
Dial*
End outgoing Change call
call device
Answer Reject
End call Change call
device
HSP (Headset Profile)
Status Multi function button
Short Press
Standby
Outgoing call End outgoing
call*
Incoming call Answer
During call End call*
1
* Some functions may not be supported
depending on the Bluetooth mobile
phone. Refer to the operating
instructions supplied with your mobile
phone.
2
* This may vary, depending on the
Bluetooth mobile phone.
3
* Some functions may not be supported
when calling using the Bluetooth
mobile phone.
Long Press
1
– Dial*
End outgoing
1 call or change
call device to
headset* 2
–
3 Change call
device to
headset