BW Technologies Gas Alert Clip Instruction Manual

Document Number:
RGP0011A
2015/07/23
Revision Date:
1
Revision:
: 3 Years
Review Cycle
Rev Section
No. Changed
0 New document
Addition of reference to SO
1 is halting production of GasAlert Clip Extreme and is introducing BW Clip monitor as of June
30, 2015, therefore reference to BW Clip Monitor is provided.
To ensure workers are familiar with proper use of the single gas personal gas monitors.
Purpose
This procedure is ONLY applicable for areas listed in Appendix III where the BW Gas Alert
Clip Extreme or BW Clip Monitor personal gas monitor has been approved for use.
Responsibilities The following individuals and groups have the following defined responsibilities:
Supervisors
Workers
Directors, EH&S,
Upstream
General Manager,
EH&S, Upstream
Warning – Uncontrolled when printed unless used for signoff! The current version of this document is kept in LiveLink.
Sheila Chernys, Director, Environment & Industrial Hygiene; Jim Chuey, General Manager, EH&S,
Approved By:
Upstream
BW Personal Gas Monitors
Procedure – Administrative
Document Owner (Title):
Director, Environment & Industrial Hygiene
Summary of Changes
BW Gas Alert Clip Monitor personal gas monitors. BW Honeywell
2
• Ensure their workers have reviewed this procedure as well as
viewed the video on bump testing personal gas monitors.
• Report all incidents involving alarms from personal gas monitors
(e.g. high alarms). Ensure an ILP or other approved incident
reporting process is initiated.
• Report all incidents involving the use of gas monitors (e.g. alarms)
to Area Shift Supervisor.
• Review this procedure and understand how to bump test personal
gas monitor.
• Report all incidents involving the use of personal gas monitors
(e.g. high alarms) to Supervisor.
• Ensure personal gas monitor is working properly and maintain it
in good repair.
• Perform bump test at least once per shift cycle or upon activation
of the bump test indicator on the BW Clip monitor.
• Ensures this document is reviewed according to the required
revision cycle.
• Ensures the document is updated to accommodate engineering
changes within the plant or new model of personal gas monitors
used at site.
• Ensures the document is updated to mitigate risks found as the
result of an incident.
• Ensures the proper use of this procedure.
• Ensures this procedure is necessary and aligns with
management and company direction.
Revisions Made
Applies To:
Oil Sands
Page 1 of 11