Set Up Hyper S Pro; Charge Your Watch - EEFINITE HYPER S Pro User Manual

Set up Hyper S Pro

Charge your watch

A fully-charged Hyper S Pro has a battery life of 7+ days. Battery life and
charge cycles vary with use and other factors, actual results will vary.
To charge Hyper S Pro:
1. Plug the charging cable into the USB port on your computer, a UL-
certified USB wall charger, or another low-energy charging device.
2. Hold the other end of the charging cable near the port on the back of
the watch until it attaches magnetically. Make sure the pins on the
charging cable align with the port on the back of your watch.
While the watch charges, tap the screen twice or press the button to turn
the screen on. The battery level appears for several seconds, then disappears
so you can use your watch while it charges. Charging fully takes
about 1-2 hours.
- 09 -