Operation - AmazonBasics B083PDMR8T Manual

EN
8

Operation

Connecting to a power source
1. Connect the cigarette lighter cable (E) to the DC input (D).
2. Connect the cigarette lighter cable (E) to a vehicle's cigarette lighter
socket.
NOTICE
After connecting the product to the power source, the
display (K) shortly shows A-01 and the power indicator (J) lights up
orange.
Switching on/off
1. Slide the emergency switch (N) to NORMAL USE position.
2. Switching the product on or off: Press and hold the power button
(H) for 3 seconds.
NOTICES
• The product saves the last used settings, even after interruption of
power supply.
• The product switches off and on at intervals to maintain the
temperature. When the compressor is running, the operating indicator
(J) lights up green.
• During normal operation, the display (K) shows the cooling
compartment's current temperature.
• For best results only store already cooled food/beverages. Select a
place that is protected from a direct sunlight.
Adjust temperature (0 to 50 °F / –18 to +10 °C)
1. Press the settings button SET (I). The cooling temperature flashes.
2. Press the buttons +/– (L) to adjust the cooling temperature.
3. Press the settings button SET (I) 3 times to confirm the setting.
Select temperature unit
1. Press the settings button SET (I) twice. The temperature unit flashes.
2. Press the buttons +/– (L) to toggle between Fahrenheit and Celsius.
3. Press settings button SET (I) twice to confirm the setting.
Vehicle battery protection
NOTICE
To prevent the vehicle battery from being fully discharged,
the product automatically stops operation when the battery voltage drops
below a preset value.