2
Installation and configuration
Note:
The information in this chapter provides an overview of the installation and configuration requirements
of the
NEXUS-3 Series
needs to be installed by qualified personnel with RF and regulatory-related knowledge.
POWERING ON THE NEXUS-3 SERIES DEVICE
1.
Install the NEXUS-3 Series device on the wall mount using a wall mounting kit, or Install the
NEXUS-3 Series device on the rack infrastructure using DIN-rail mounting brackets.
2.
Connect a network cable.
3.
Connect the supplied PSU to the NEXUS-3 Series device
4.
Press the power button to turn it on.
Note:
For warranty purposes it is recommended that only the included power supply should be used with
NEXUS-3 Series devices.
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
NEXUS-3 Series |
device. The
NEXUS-3 Series
NEXUS-3
Warning:
can be powered by a 24 V DC supply only.
The device will be damaged if connected to a 24 V AC power source.
Installation and configuration
device is designed for specific applications and
10