Connections - RFC HVL Series Owner's Manual

3. CONNECTIONS

INPUT TERMINAL
THROUGH TERMINAL
The rear panel features two TERMINALS: the INPUT TERMINAL receives the signals from the amplifier, the THROUGH TERMINAL is used to
send the signal to another speaker�
INPUT TERMINAL
On the INPUT TERMINAL, section
receives the Mid/HF signal from the amplifier (LF RIGHT signal on HVL 15-S).
THROUGH TERMINAL
On the THROUGH TERMINAL, section
sends the Mid/HF signal to another speaker (LF RIGHT signal on HVL 15-S).
WARNING! CAUTION! Loudspeaker connections should be only made by qualified and experienced personnel
having the technical know-how or enough specific instructions (to ensure that connections are made correctly) in order to
prevent any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the amplifier is switched on.
Before turning the system on, check all connections and make sure there are no accidental short circuits.
The entire sound system shall be designed and installed in compliance with the current local laws and regulations regarding
electrical systems.
A
C
A
receives the LF signal from the amplifier (LF LEFT signal on HVL 15-S); section
C
sends the LF signal to another speaker (LF LEFT signal on HVL 15-S); section
B
D
B
D
7