Operation And Important Riding Points; Starting A Cold Engine - Yamaha YW50A Owner's Manual

Read the Owner's Manual carefully
to become familiar with all controls.
If there is a control or function you
do not understand, ask your Yamaha
dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

OPERATION AND IMPORTANT RIDING POINTS
EAU15951

Starting a cold engine

NOTICE
See page 5-4 for engine break-in
instructions prior to operating the
EWA10271
vehicle for the fi rst time.
ENGINE STOP
ZAUM00**
1. Engine stop switch "#/$"
1. Set the engine stop switch to "#".
2. Turn the key to "*", and when the
oil level warning light comes on,
turn it to "ON".
EAUT2762
3. Close the throttle completely.
ECA10250
ZAUM00**
1. Kickstarter lever
4. While applying the front or rear
1
5-1
brake, start the engine by push-
ing the start switch or by pushing
the kickstarter lever down. NO-
TICE: For maximum engine life,
never accelerate hard when the
engine is cold!
[ECA11041]
If the engine fails to start by push-
ing the start switch, release the
switch, wait a few seconds, and
then try again. Each starting at-
tempt should be as short as pos-
sible to preserve the battery. Do
not crank the engine more than
5 seconds on any one attempt. If
the engine does not start with the
EAU15943 EAU15943
1
2
1
3
4
5
6
7
8
9