JVC AV-28H5BU Service Manual page 34

4.9.5 VSM PRESET SETTING
Measuring
Item
instrument
VSM PRESET Remote
control unit
VSM PRESET TABALE
Variable
Item
range
1.BRIGHT -16 - +16
2.CONT -16 - +16
3.COLOUR -16 - +16
4.SHARP -16 - +16
5.HUE -16 - +16
1.WDR R -64 - +63
2.WDR G -64 - +63
3.WDR B -64 - +63
1-34 (No.YA263)
Test point Adjustment part
[5. VSM PRESET]
1. BRIGHT
2. CONT
3. COLOUR
4. SHARP
5. HUE
1. WDR R
2. WDR G
3. WDR B
PICTURE MODE
BRIGHT STANDARD
0 0
+7 0
0 0
0 0
0 0
--- ---
--- ---
--- ---
Description
(1) Select 5. VSM PRESET from the SERVICE MODE.
(2) Set the PICTURE MODE to BRIGHT.
(3) Select < 1.BRIGHT >.
(4) Set the initial setting value of PICTURE MODE, as
shown in the below table.
(5) Press the [MENU] key to memorize the set value.
(6) Select < 2.CONT > to < 5.HUE > in turn, and set the
values.
(7) Respectively select the "SOFT" and "STANDARD".
Make similar adjustment as same step as above.
(8) Set the COLOUR TEMP to COOL.
(9) Select < 1.WDR R >.
(10) Set the initial setting value of COLOUR TEMP., as
shown in the below table.
(11) Press the [MENU] key to memorize the set value.
(12) Select < 2.WDR G > and < 3.WDR B > in turn, and
set values.
(13) Respectively select the "WARM" and "NORMAL".
Make similar adjustment as same step as above.
Setting value
COLOUR TEMP.
SOFT COOL
0 ---
-3 ---
0 ---
-2 ---
0 ---
--- -15
--- -9
--- 0
NORMAL WARM
--- ---
--- ---
--- ---
--- ---
--- ---
0 +4
0 0
0 0