Advertisement
Available languages
Available languages
Nightlight
The nightlight function provides a light source for convenience in dark
areas.
• To enable/disable the nightlight:
— Use a voice command.
— Press and hold the volume down button.
— (Beta) Double tap the front and top area (as shown in the
illustration) of your device.
Note:
• Cover the sensor area while tapping with your hand.
• The new feature is in beta testing. Feel free to try out its current
functionality.
• To adjust the brightness of the nightlight, use a voice command.
Alarm Clock
Check the alarm clock
Short press the alarm setup button to
check existing alarms.
If you have more than one alarm, short
press the alarm setup button again to
switch to the next alarm clock.
Set an alarm clock
Press and hold the alarm setup button for more than 2 seconds to enter
the alarm clock setting mode.
• Press the alarm setup button to confirm the current setting and
automatically switch between the routine, hours and minutes categories.
• Press the volume up/down buttons to set each category.
6
Advertisement
